EasyManua.ls Logo

Hilti DSH 900-X - Preparation for Operation; Fuel requirements and mixing

Hilti DSH 900-X
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 13
DSH 700 30/12" /
DSH 700-X 30/12"
DSH 700 35/14" /
DSH 700-X 35/14"
Measured sound power level 2000/14/EC (ISO
3744)
108 dB(A) 108 dB(A)
Uncertainty
2.5 dB(A) 2.5 dB(A)
Guaranteed sound power level 2000/14/EC (ISO
3744) (L
wa
)
111 dB(A) 111 dB(A)
DSH 900 35/14" /
DSH 900-X 35/14"
DSH 900 40/16" /
DSH 900-X 40/16"
Sound pressure level, ISO 19432 (ISO 11201)
(L
pa,eq
)
102 dB(A) 102 dB(A)
Uncertainty
3.0 dB(A) 3.0 dB(A)
Measured sound power level 2000/14/EC (ISO
3744)
112 dB(A) 112 dB(A)
Uncertainty
2.5 dB(A) 2.5 dB(A)
Guaranteed sound power level 2000/14/EC (ISO
3744) (L
wa
)
115 dB(A) 115 dB(A)
Total vibration
The sound pressure level and the vibration values were determined allowing for 1/7 no-load operation and
6/7 full-load operation.
DSH 700 30/12" /
DSH 700-X 30/12"
DSH 700 35/14" /
DSH 700-X 35/14"
Vibration at the forward grip, ISO 19432 (EN
12096) (a
hv,eq
)
4.5 m/s² 4.7 m/s²
Uncertainty
2.4 m/s² 2.2 m/s²
Vibration at the rear grip, ISO 19432 (EN 12096)
(a
hv,eq
)
3.2 m/s² 5.0 m/s²
Uncertainty
2.1 m/s² 2.1 m/s²
DSH 900 35/14" /
DSH 900-X 35/14"
DSH 900 40/16" /
DSH 900-X 40/16"
Vibration at the forward grip, ISO 19432 (EN
12096) (a
hv,eq
)
6.3 m/s² 5.2 m/s²
Uncertainty
1.9 m/s² 2.3 m/s²
Vibration at the rear grip, ISO 19432 (EN 12096)
(a
hv,eq
)
6.2 m/s² 4.5 m/s²
Uncertainty
2.7 m/s² 2.1 m/s²
5 Before use
5.1 Fuel
The two-stroke engine runs on a mixture of gasoline and oil. The quality of the fuel mixture decisively
influences the running and life expectancy of the engine.
DANGER
Risk of fire and explosion. Gasoline vapors are highly flammable.
Never smoke while refueling.
Don’t refuel the product at the area where you are working (move at least 3 meters (10 feet) away from
the working area).
Don’t refuel the product while the engine is running. Wait until the engine has cooled down.
Make sure there are no naked flames or sparks that could ignite the gasoline vapors.
Take care to avoid fuel spillage. If fuel is spilled, clean up the areas affected immediately.
Check to ensure there is no leakage from the fuel tank.
Printed: 24.04.2018 | Doc-Nr: PUB / 5265931 / 000 / 02

Other manuals for Hilti DSH 900-X

Related product manuals