EasyManuals Logo

Hilti SCW 22-A Original Operating Instructions

Hilti SCW 22-A
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
18 English
8.2 The circular saw is in working order.
Trouble or fault Possible cause Action to be taken
The on/off button cannot be
pressed, i.e. the button is
locked.
Not a fault (safety function). Press the safety lock.
Running speed suddenly
drops considerably.
The battery is discharged. Charge the battery.
Saw advance pressure is too high. Reduce advance pressure and
switch the product back on.
The battery runs down more
quickly than usual.
Battery condition is not optimal. Replace the battery.
The product doesn’t restart
by itself after the saw blade
has stalled.
The overload cut-out has been
activated.
Press the switch-on interlock
and the on/off button again.
The battery does not en-
gage with an audible "double
click".
The retaining lugs on the battery
are dirty.
Clean the retaining lugs and refit
the battery.
The circular saw or battery
gets very hot.
Electrical fault. Switch off the circular saw
immediately. Remove the
battery and keep it under
observation. Allow the battery
to cool down. Contact Hilti
service.
The product is overloaded (appli-
cation limits exceeded).
Select a tool that is suitable for
its intended use.
No suction power or reduced
suction power
The chip ejector channel is
blocked.
Clean the chip / dust channel.
page 16
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
Battery disposal
Improper disposal of batteries can result in health hazards from leaking gases or fluids.
DO NOT send batteries through the mail!
Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
Dispose of your battery out of the reach of children.
Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Do not dispose of power tools, electronic equipment or batteries as household waste!
10 Manufacturer’s warranty
Please contact your local Hilti representative if you have questions about the warranty conditions.
Printed: 24.05.2019 | Doc-Nr: PUB / 5292954 / 000 / 01

Other manuals for Hilti SCW 22-A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hilti SCW 22-A and is the answer not in the manual?

Hilti SCW 22-A Specifications

General IconGeneral
Blade diameter165 mm
Idle speed (max)4000 RPM
Cutting depth (45º)42 mm
Cutting depth (90º)57 mm
Sound pressure level93 dB
Vibration level (wood cutting)1.2 m/s²
Product colorBlack, Red
Country of originGermany
Dust extraction portYes
Power sourceBattery
Diamond disc-
Battery includedNo
Quantity per shipping (inner) case1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Package depth898 mm
Package width5400 mm
Package height2000 mm
Package weight1345 g

Related product manuals