EasyManua.ls Logo

Hilti SF 6H-A22 - Operation; Battery Installation and Removal

Hilti SF 6H-A22
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 13
Ø drilling in con-
crete/masonry (hammer
drilling)
5/32 in 1/2 in
Ø drilling in con-
crete/masonry (hammer
drilling)
4 mm …12 mm
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
Before fitting the battery, check that the drill/driver is switched off
and that the switch safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
Before inserting the battery, check to ensure that the battery terminals
and the contacts in the drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
Check that the battery is securely seated in the tool so that it cannot
drop out and fall, thereby presenting a hazard to other persons.
Fit the battery and check that the battery is securely seated in the power
tool.
Printed: 01.02.2017 | Doc-Nr: PUB / 5329076 / 000 / 00

Related product manuals