Hilti SF 6H-A22 User Manual

English 3
Item reference numbers are used in the overview illustration and
refer to the numbers used in the key in the product overview sec-
tion.
This symbol is intended to draw special attention to certain points
when handling the product.
1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols are used on the product:
Drilling without hammering
Drilling with hammering action (hammer drilling)
Protection class II (double-insulated)
Rated speed under no load
Revolutions per minute
1.4 Product information
Hilti products are designed for professional use and may be operated, ser-
viced and maintained only by trained, authorized personnel. This personnel
must be informed of any particular hazards that may be encountered. The
product described and its ancillary equipment may present hazards when
used incorrectly by untrained personnel or when used not as directed.
The type designation and serial number are printed on the type identification
plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to enquire about the product.
Product information
Drill/driver SF 6H-A22
Generation 01
Serial no.
2 Safety
2.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Printed: 01.02.2017 | Doc-Nr: PUB / 5329076 / 000 / 00

Hilti SF 6H-A22 Specifications

General

Reverse	Yes
Handle shape	Pistol handle
Product type	Power screwdriver
Product color	Black, Red
Country of origin	Germany
Number of gears	2
Idle speed (max)	1480 RPM
Idle speed (min)	1600 RPM
Screw diameter (max)	13 mm
Maximum torque (hard applications)	80 N⋅m
Maximum torque (soft applications)	50 N⋅m
Noise level	84 dB
Vibration emission	2 m/s²
Power source	Battery
Battery included	No
Quantity per shipping (inner) case	1 pc(s)

Weight and Dimensions

Depth	212 mm
Width	92 mm
Height	210 mm
Weight	1580 g
Package depth	980 mm
Package width	1005 mm
Package height	2000 mm
Package weight	5956 g