Hilti SF 6H-A22 User Manual

20 English
Trouble or fault Possible cause Action to be taken
1 LED blinks.
The drill / driver
doesn’t work.
The battery is too hot. ▶ Bring the battery to
the recommended op-
erating temperature.
Hammer drilling is
not possible.
The operating mode is
not set correctly at the
selector ring.
▶ Set the selector ring to
the “Hammer drilling”
position .
The control switch
can’t be pressed, i.e.
the switch is locked.
The forward/reverse se-
lector switch is in the
middle (transport) posi-
tion.
▶ Push the
forward/reverse
switch to the left or
right.
The drill / driver or
the battery gets very
hot.
Electrical fault. ▶ Switch the drill /
driver off immediately,
remove the battery
and contact Hilti
Service.
The drill / driver is over-
loaded (application limit
exceeded).
▶ Check the application.
9 Disposal
WARNING
Risk of injury. Hazards presented by improper disposal.
▶ Improper disposal of the equipment may have the following conse-
quences: The burning of plastic components generates toxic fumes
which may present a health hazard. Batteries may explode if dam-
aged or exposed to very high temperatures, causing poisoning,
burns, acid burns or environmental pollution. Careless disposal may
permit unauthorized and improper use of the equipment. This may
result in serious personal injury, injury to third parties and pollution of
the environment.
▶ Dispose of defective batteries right away. Keep them out of reach of
children. Do not disassemble or incinerate the batteries.
▶ Batteries that have reached the end of their life must be disposed of
in accordance with national regulations or returned to Hilti.
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
Printed: 01.02.2017 | Doc-Nr: PUB / 5329076 / 000 / 00

Hilti SF 6H-A22 Specifications

General

Reverse	Yes
Handle shape	Pistol handle
Product type	Power screwdriver
Product color	Black, Red
Country of origin	Germany
Number of gears	2
Idle speed (max)	1480 RPM
Idle speed (min)	1600 RPM
Screw diameter (max)	13 mm
Maximum torque (hard applications)	80 N⋅m
Maximum torque (soft applications)	50 N⋅m
Noise level	84 dB
Vibration emission	2 m/s²
Power source	Battery
Battery included	No
Quantity per shipping (inner) case	1 pc(s)

Weight and Dimensions

Depth	212 mm
Width	92 mm
Height	210 mm
Weight	1580 g
Package depth	980 mm
Package width	1005 mm
Package height	2000 mm
Package weight	5956 g