Hilti SFD 2-A12 User Manual

8 English 2235440
*2235440*
3.2 Intended use
The product described is a hand-held cordless drill / driver for driving and
removing screws, drilling in metal, wood and plastic.
▶ Use only Hilti Liion batteries of the B 12 series with this product.
▶ Use only Hilti battery chargers of the C4/12 series for charging these
batteries.
3.3 Items supplied
Drill / driver, operating instructions
Other system products approved for use with this product can be found
at your local Hilti Store or at: www.hilti.group
4 Technical data
4.1 Technical data
SFD 2-A12
Rated voltage
10.8 V
Weight
1.0 kg
(2.2 lb)
Speed in 1st gear
0 /min …
400 /min
Speed in 2nd gear
0 /min …
1,600 /min
Torque (soft joint)
21 Nm
Torque range (15 settings)
0.5 Nm … 5 Nm
(0.4 ftlb
f
…
4 ftlb
f
)
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 70 ℃
(−4 ℉ … 158 ℉)
4.2 Battery
Battery operating voltage
10.8 V
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Battery charging starting temperature
−10 ℃ … 45 ℃
(14 ℉ … 113 ℉)
Printed: 19.08.2019 | Doc-Nr: PUB / 5509398 / 000 / 00

Hilti SFD 2-A12 Specifications

General

Voltage	12 V
Chuck size	10 mm
Weight	0.8 kg
Battery Type	Li-ion
Chuck type	Keyless
Blows per Minute	Not applicable
No load RPM	0-1, 500 rpm
No-load Speed	0-1, 500 rpm