Hilti SFD 2-A12 User Manual

12 English 2235440
*2235440*
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Store or online at: www.hilti.group.
8 Transport and storage of cordless tools
Transport
CAUTION
Accidental starting during transport !
▶
Always transport your products with the batteries removed!
▶ Remove the battery.
▶ Never transport batteries in bulk form (loose, unprotected).
▶ Check the tool and batteries for damage before use after long periods of
transport.
Storage
CAUTION
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the tool and batteries in a place that is as cool and dry as possible.
▶ Never store batteries in direct sunlight, on heating units or behind a
window pane.
▶ Store the tool and batteries in a place where they cannot be accessed by
children or unauthorized persons.
▶ Check the tool and batteries for damage before use after long periods of
storage.
9 Troubleshooting
9.1 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
9.1.1 Troubleshooting
Trouble or fault Possible cause Action to be taken
The power tool does
not work.
The battery is not fully
inserted.
▶ Insert the battery.
→ page 9
Low battery. ▶ Charge the battery.
→ page 9
Printed: 19.08.2019 | Doc-Nr: PUB / 5509398 / 000 / 00

Hilti SFD 2-A12 Specifications

General

Voltage	12 V
Chuck size	10 mm
Weight	0.8 kg
Battery Type	Li-ion
Chuck type	Keyless
Blows per Minute	Not applicable
No load RPM	0-1, 500 rpm
No-load Speed	0-1, 500 rpm