EasyManuals Logo

Hilti TE 70-AVR Operating Instructions

Hilti TE 70-AVR
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
10 Disposal
Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or
Hilti representative for further information.
11 Manufacturer’s warranty - tools
Hilti warrants that the tool supplied is free of defects in
materialandworkmanship.Thiswarrantyisvalidsolong
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or re-
placement of defective parts only over the entire lifespan
of the tool. Parts requiring repair or replacement as a
result of normal wear and tear are not covered by this
warranty.
Additional claims are excluded, unless stringent na-
tional rules prohibit such exclusion. In particular, Hilti
is not obligated for direct, indirect, incidental or con-
sequential damages, losses or expenses in connec-
tion with, or by reason of, the use of, or inability to
use the tool for any purpose. Implied warranties of
merchantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send the tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti’s entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
en
11

Other manuals for Hilti TE 70-AVR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hilti TE 70-AVR and is the answer not in the manual?

Hilti TE 70-AVR Specifications

General IconGeneral
CategoryPower Tool
TypeRotary Hammer
Single Impact Energy11.5 J
Hammer Drilling Diameter Range12 - 40 mm
Drilling Diameter Range (Hammer Drill Bits)12 - 40 mm
Dust Removal Module AvailableYes
Power SourceCorded Electric
Voltage230 V
Drilling ModeHammer drilling, chiseling
Vibration ReductionActive Vibration Reduction (AVR)
Drilling Diameter Range (Hollow Drill Bits)40 - 100 mm
Full Hammering Frequency3510 impacts/minute
Blows Per Minute2760 BPM
Sound Pressure Level91 dB(A)
Tool Chuck TypeSDS-max
Tool HolderSDS-max
Vibration Level9.6 m/s² (Hammer drilling into concrete)

Related product manuals