Need help?Do you have a question about the Hilti TE 70-AVR and is the answer not in the manual?
General| Category | Power Tool |
|---|---|
| Type | Rotary Hammer |
| Single Impact Energy | 11.5 J |
| Hammer Drilling Diameter Range | 12 - 40 mm |
| Drilling Diameter Range (Hammer Drill Bits) | 12 - 40 mm |
| Dust Removal Module Available | Yes |
| Power Source | Corded Electric |
| Voltage | 230 V |
| Drilling Mode | Hammer drilling, chiseling |
| Vibration Reduction | Active Vibration Reduction (AVR) |
| Drilling Diameter Range (Hollow Drill Bits) | 40 - 100 mm |
| Full Hammering Frequency | 3510 impacts/minute |
| Blows Per Minute | 2760 BPM |
| Sound Pressure Level | 91 dB(A) |
| Tool Chuck Type | SDS-max |
| Tool Holder | SDS-max |
| Vibration Level | 9.6 m/s² (Hammer drilling into concrete) |
To Next Page
