EasyManuals Logo

Hilti TE 70-AVR Manual

Hilti TE 70-AVR
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
10 English 2063040
*2063040*
Trouble or fault Possible cause Action to be taken
Drill bit is not released. The side handle is not fitted cor-
rectly.
Disengage the side handle and
refit it correctly so that the
clamping band and side handle
engage in the recess.
The service indicator blinks
red.
A fault has occurred in the tool. Have the product repaired by
Hilti Service.
The service indicator lights
red.
The carbon brushes are worn. Have checked, and if necessary
replaced, by a trained electrical
specialist.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
Do not dispose of power tools, electronic equipment or batteries as household waste!
10 RoHS (Restriction of Hazardous Substances)
Click on the links to go to the table of hazardous substances: qr.hilti.com/r1021413 (TE70-AVR),
qr.hilti.com/r1021424 (TE70-ATC/AVR) and qr.hilti.com/r1021505 (TE80-ATC/AVR).
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
11 Manufacturer’s warranty
Please contact your local Hilti representative if you have questions about the warranty conditions.

Other manuals for Hilti TE 70-AVR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hilti TE 70-AVR and is the answer not in the manual?

Hilti TE 70-AVR Specifications

General IconGeneral
CategoryPower Tool
TypeRotary Hammer
Single Impact Energy11.5 J
Hammer Drilling Diameter Range12 - 40 mm
Drilling Diameter Range (Hammer Drill Bits)12 - 40 mm
Dust Removal Module AvailableYes
Power SourceCorded Electric
Voltage230 V
Drilling ModeHammer drilling, chiseling
Vibration ReductionActive Vibration Reduction (AVR)
Drilling Diameter Range (Hollow Drill Bits)40 - 100 mm
Full Hammering Frequency3510 impacts/minute
Blows Per Minute2760 BPM
Sound Pressure Level91 dB(A)
Tool Chuck TypeSDS-max
Tool HolderSDS-max
Vibration Level9.6 m/s² (Hammer drilling into concrete)

Related product manuals