HIMA HIMatrix F2 DO 16 02 - Equipment, Scope of Delivery

3 Product Description F2 DO 16 02
Page 12 of 42 HI 800 139 E Rev. 2.00
3.2 Equipment, Scope of Delivery
The following table specifies the available remote I/O variants:
Designation Description
F2 DO 16 02 Remote I/O (16 relay outputs up to 30 VAC/ 60 VDC),
Operating temperature: 0...+60 °C,
for ELOP II Factory programming tool
F2 DO 16 02
SILworX
Remote I/O (16 relay outputs up to 30 VAC/ 60 VDC),
Operating temperature: 0...+60 °C,
for SILworX programming tool
Table 4: Available Variants
3.2.1 IP Address and System ID (SRS)
A transparent label is delivered with the device to allow one to note the IP address and the
system ID (SRS for system rack slot) after a change.
IP___.___.___.___SRS____.__.__
Default value for IP address: 192.168.0.99
Default value for SRS: 60 000.200.0 (SILworX)
60 000.0.0 (ELOP II Factory)
The label must be affixed such that the ventilation slots in the housing are not obstructed.
Refer to the First Steps manual of the programming tool for more information on how to modify
the IP address and the system ID.