HIMA HIMatrix F2 DO 16 02 - Table of Contents

F2 DO 16 02 Table of Contents
HI 800 139 E Rev. 2.00 Page 3 of 42
Table of Contents
1
Introduction 5
1.1 Structure and Use of this Manual 5
1.2 Target Audience 6
1.3 Formatting Conventions 7
1.3.1 Safety Notes 7
1.3.2 Operating Tips 8
2 Safety 9
2.1 Intended Use 9
2.1.1 Environmental Requirements 9
2.1.2 ESD Protective Measures 9
2.2 Residual Risk 10
2.3 Safety Precautions 10
2.4 Emergency Information 10
3 Product Description 11
3.1 Safety Function 11
3.2 Equipment, Scope of Delivery 12
3.2.1 IP Address and System ID (SRS) 12
3.3 Type Label 13
3.4 Structure 14
3.4.1 Safety-Related Relay Outputs 15
3.4.1.1 Burner Control Applications 15
3.4.1.2 General Safety Applications 16
3.4.2 LED Indicators 17
3.4.2.1 Operating Voltage LED 17
3.4.2.2 System LEDs 17
3.4.2.3 Communication LEDs 18
3.4.2.4 I/O LEDs 18
3.4.3 Communication 19
3.4.3.1 Connections for Ethernet Communication 19
3.4.3.2 Network Ports Used for Ethernet Communication 19
3.4.4 Reset Key 20
3.5 Product Data 21
3.6 Certified HIMatrix F2 DO 16 02 23
4 Start-up 24
4.1 Installation and Mounting 24
4.1.1 Connecting the Digital Outputs 24
4.1.2 Cable Plugs 25
4.1.3 Mounting the F2 DO 16 02 in Zone 2 26
4.2 Configuration 27