CPU 03 3 Product Description
HI 800 479 E Rev. 1.00 Page 11 of 38
3.2 Equipment and Scope of Delivery
The following list specifies the available components and the corresponding part numbers:
Designation Description Part no.
CPU 03 SILworX
Central module,
for SILworX programming tool
98 2200139
Table 3: Part Numbers
3.2.1 IP Address and System ID (SRS)
A transparent label is delivered with the device to allow one to note the IP addresses of the
CPU and COM and the system ID (SRS for system rack slot) after a change.
Default value for IP address of the CPU: 192.168.0.99
Default value for IP address of the COM: 192.168.0.100
Default value for SRS: 60000.0.0
The label must be affixed such that the ventilation slots in the housing are not obstructed.
Refer to the SILworX First Steps manual for more information on how to modify the IP
address and the system ID.
3.3 Type Label
The type plate contains the following details:
Product name
Bar code (1D or 2D code)
Part no.
Production year
Hardware revision index (HW Rev.)
Firmware revision index (FW Rev.)
Operating voltage
Mark of conformity
Figure 1: Sample Type Label
To Next Page
Loading...
Need help?
General
