CPU 03 4 Start-up
HI 800 479 E Rev. 1.00 Page 27 of 38
4.4.1.6 Tab: Mirroring
Mirroring is used to configure whether the module should duplicate Ethernet packets on a
given port such that they can be read from a device connected to that port, e.g., for test
purposes.
The following parameters define how a given port should work:
Off This port does not participate to the mirroring process.
Egress: Outgoing data of this port are duplicated.
Ingress/Egress: Incoming and outgoing data of this port are duplicated.
Dest Port: This port is used to send duplicated data.
Default setting: OFF
4.4.2 Communication Module
The communication module (COM) contains the Module tab and the Routings tab. Their
content is identical to those of the processor module, see
Table 16 and Table 17.
To Next Page
Loading...
Need help?
General
