(APPENDIX I) PARAMETERS TABLE | PAGE 32
10. APPENDIX I: PARAMETERS TABLE
The CEC7 control unit allows 3 levels of access for settings. To modify any of the
CEC7 control unit's parameters validation is required by entering the correspond-
ing password. The 3 levels of access are:
1. User. Allows level 1 values to be read. (Default password: 1111).
2. Maintenance. Allows level 1 and level 2 parameters to be written. (Default
password: 1911).
3. Supervisor. Allows level 1, 2 and 3 parameters to be written. (Restricted pass-
word, only for manufacturer).
To Next Page
Loading...
