MAINTENANCE | PAGE 28
8. MAINTENANCE
8.1 LIST OF PREVIOUS ERRORS
The CEC7 control unit keeps a record of the detected alarms saving the status of
the control unit when they occurred. The CEC7 control unit stores the last 100
errors detected.
8.2 LIST OF EQUIPMENT
8.2.1. INFORMATION ON THE LIST OF EQUIPMENT
The CEC7 control unit allows the identication and monitoring of all the electronic
devices currently connected to the control unit. To do this, access the menu
ParametersàList of Equipment. In this menu item, all the electronic equipment
are listed for measurements (PHR and PHG) and display (CEM7, CEA7 and CEC7)
currently connected, indicating with an asterisk (-) the module from which you are
viewing the list of equipment.
The information relating to this equipment includes:
• The electronic module model.
• The electronic module ID number (from 0 to 14).
• The rmware version .
• For display modules (CEM7, CEA7 and CEC7), the measurement
equipment to which it is associated is indicated in parentheses. For
display modules (CEM7 and CEA7), the Master display module must
have the same ID as the associated measurement module. For
repetitive display modules, the module must have a different ID than
the master display and must be associated to the same measurements
module. For switching control unit display modules (CEC7) the display
module must have the same ID as the measurements module of the
associated switching control unit and in brackets the ID of the genset
measurements module to which the manual control unit is associated.
To Next Page
Loading...
Need help?
General
