21
Systolic blood pressure
measurement range
40-260 mmHg
Diastolic blood pressure
measurement range
20-210 mmHg
Pulse rate measurement
range
40-200 bpm
Resolution Blood pressure: 1mmHg or 0.1Kpa; pulse rate: 1BPM
Repeatability
The difference of repeated readings of each point is within
4mmHg in the statically continuous low-pressure mode
Accuracy Static Accuracy: ±3 mmHg; Pulse rate: ±3BPM
Pressure testing American Freescale pressure sensor
Working power supply Two 5 AA alkaline batteries
Data memory Flash memory stores up to 300 readings
Calibration frequency At least one time two years
Security system The rated range of cuff pressure: 0~290mmHg
Sampling period
Multiple independent programming cycle (5, 10, 15, 20, 30, 45,
60, 90, 120 minutes)
Size About 118×67×29mm
Net weight About 210g，including battery
Work environment T: 5℃-40℃; HR: 10%-95%; gas pressure: 70KPa-106KPa
Condition of storage
Stored under the condition of temperature (-20℃-+55℃), HR
(no more than 95%) and atmospheric pressure
(70KPa-106Kpa), no corrosive gases and well-ventilated.
Data transmitted by USB data wire
Protection against
harmful ingress of water
IP22
Software version
Embedded software: 1.0
PC software: 1.0
* There is not further notice if product specification changes.
Chapter 7 EMC information
This product needs special precautions regarding EMC and needs to be installed and put
into service according to the EMC information provided, and this unit can be affected by
portable and mobile RF communications equipment.
Do not use a mobile phone or other devices that emit electromagnetic fields, near
the unit. This may result in incorrect operation of the unit.
Caution: This unit has been thoroughly tested and inspected to assure proper
performance and operation!
To Next Page
Loading...
