What to do if HINGMED ABP-03 shows overpressure?
If the HINGMED Blood Pressure Monitor displays an overpressure error, where the cuff pressure exceeds 290mmHg in adult mode, 247mmHg in child mode, or 145mmHg in neonatal mode, press the “start/stop” button to measure again.
How to fix system error on HINGMED Blood Pressure Monitor?
If your HINGMED Blood Pressure Monitor shows a system error, try restarting it. If the error occurs frequently, professional maintenance may be necessary.
What to do if HINGMED ABP-03 shows weak signal?
If the HINGMED Blood Pressure Monitor displays a 'weak signal' message, it might be due to a loose cuff. Check the cuff and tighten it if necessary.
How to fix loose cuff on HINGMED ABP-03?
If the HINGMED Blood Pressure Monitor displays a message indicating the cuff is too loose, this may be due to loose winding or a disconnected cuff. Retighten the cuff or maintain proper arm position during inflation.
What to do if HINGMED ABP-03 is beyond the limit?
If the HINGMED Blood Pressure Monitor shows 'beyond the limit', this may be because the subject's pressure exceeds the device's limitation. Press the “start/stop” button to measure again. If the issue persists, consider using a monitor with a larger range.
What does signal saturation mean on HINGMED Blood Pressure Monitor?
If you receive a 'signal saturation' message on the HINGMED Blood Pressure Monitor, where the signal amplitude is too large due to activity or other reasons, keep quiet and press the “start/stop” button to measure again.
Why does HINGMED ABP-03 Blood Pressure Monitor show excessive exercise?
If the HINGMED Blood Pressure Monitor displays 'Excessive exercise', this may be caused by too much motion or interference. Keep quiet during the measurement and avoid moving the arm with the cuff.
What does overtime mean on HINGMED ABP-03 Blood Pressure Monitor?
If the HINGMED Blood Pressure Monitor shows an overtime error, where the measuring time exceeds 120s in adult/child mode or 90s in neonatal mode, keep quiet and press the “start/stop” button to measure again.
How to fix air leakage in HINGMED Blood Pressure Monitor?
If the HINGMED Blood Pressure Monitor experiences air leakage, possibly due to valve or gas path leakage, tighten the metal connector and check the cuff. If the leakage persists, contact your agent or dealer.
How to fix air pressure error on HINGMED Blood Pressure Monitor?
If the HINGMED Blood Pressure Monitor experiences an air pressure error, possibly due to the valve being unable to open, check whether the valve can work normally.
Details of the manufacturing company.
Contact information for post-purchase support.
Contact details for the EU representative.
Details on the manual's version and issue date.
Explains the concept and benefits of ABPM.
Highlights the monitor's features and body position information.
Lists the medical conditions for which the device is used.
Specifies the device's primary purpose and user limitations.
Lists conditions where the device should not be used.
Important safety precautions and potential hazards.
Specific notes on battery, training, and measurement.
Lists the main unit and included accessories.
Identifies and explains the device's parts and displays.
Explains the meaning of various symbols used on the device.
Step-by-step guide for inserting batteries.
Instructions for setting up the PC software.
Steps for performing a monitoring study with the device.
Guidance on choosing and attaching the blood pressure cuff.
Pre-study preparation and patient instructions.
Process for transferring and analyzing collected data.
Lists common errors and their resolutions.
Procedures for device upkeep and inspection.
Outlines the product warranty terms and conditions.
General| Model | ABP-03 |
|---|---|
| Measurement Method | Oscillometric |
| Accuracy (Pressure) | ±3 mmHg |
| Display | LCD |
| Type | Automatic Blood Pressure Monitor |
| Power Source | 4 x AA batteries or AC adapter |
| Operating Humidity | 15% to 85% RH |
| Measurement Range (Pulse) | 40-200 beats/min |
To Next Page
