What to do if HINGMED Blood Pressure Monitor restarts with pressure above 15mmHg?
If the HINGMED Blood Pressure Monitor finishes a measurement and restarts while the pressure is still above 15mmHg, gas and remeasure when the cuff pressure declines to below 15mmHg.
How to adjust max pressure setting on HINGMED Blood Pressure Monitor?
If the HINGMED Blood Pressure Monitor cuff pressure exceeds the maximum pressure setting, reprogramming in PC software and up-regulate the max inflation pressure setting.
What to do if HINGMED ABP-03 Blood Pressure Monitor shows no answer?
If the HINGMED Blood Pressure Monitor displays 'No answer when the measurement command is sent', press the “start/stop” button to measure again.
What to do if HINGMED ABP-03 Blood Pressure Monitor measurement result is not available?
If the HINGMED Blood Pressure Monitor displays 'Measurement result is not available', press the “start/stop” button to measure again.
How to resolve handshake communication fail on HINGMED ABP-03 Blood Pressure Monitor?
If the HINGMED Blood Pressure Monitor experiences a handshake communication failure, press the “start/stop” button to measure again.
What to do if HINGMED ABP-03 memory is full?
If the HINGMED Blood Pressure Monitor memory is full and can no longer measure, upload and empty the data.
Details of the manufacturing company.
Contact information for post-purchase support.
Contact details for the EU representative.
Details on the manual's version and issue date.
Explains the concept and benefits of ABPM.
Highlights the monitor's features and body position information.
Lists the medical conditions for which the device is used.
Specifies the device's primary purpose and user limitations.
Lists conditions where the device should not be used.
Important safety precautions and potential hazards.
Specific notes on battery, training, and measurement.
Lists the main unit and included accessories.
Identifies and explains the device's parts and displays.
Explains the meaning of various symbols used on the device.
Step-by-step guide for inserting batteries.
Instructions for setting up the PC software.
Steps for performing a monitoring study with the device.
Guidance on choosing and attaching the blood pressure cuff.
Pre-study preparation and patient instructions.
Process for transferring and analyzing collected data.
Lists common errors and their resolutions.
Procedures for device upkeep and inspection.
Outlines the product warranty terms and conditions.
General| Model | ABP-03 |
|---|---|
| Measurement Method | Oscillometric |
| Accuracy (Pressure) | ±3 mmHg |
| Display | LCD |
| Type | Automatic Blood Pressure Monitor |
| Power Source | 4 x AA batteries or AC adapter |
| Operating Humidity | 15% to 85% RH |
| Measurement Range (Pulse) | 40-200 beats/min |
To Next Page
