13
Chapter 5 Instructions of Command Sets
*CLS
*IDN?
*RST
LLO
GTL
Instructions of
Command Sets Chapter 5
5.1 IEEE 488 Common Commands
Description Clear the System Error Queue.
Description Query the Meter identification.
Response Returns instrument maker name, model number, serial number
and firmware version.
Description Put the meter to power-on-reset state, but no affect the Output
Queue and interface parameter.
The reset operation is executed for 3 seconds at least. Be sure to execute
other commands then.
Description Put the meter into the local lockout state when in remote
control. This means no local key operation at the front panel is
allowed during remote control.
Description Put the meter into the local state, clearing the remote state and
front panel lockout.
To Next Page
Loading...
