1
Introduction
Introduction
The Section describes how to operate the meter via an optical
interface.
• It also explains the detail information of all interface command sets
of Standard Commands for Programmable Instruments (SCPI) used
in the meter.
• The remote control operation enables the user either to manually
operate the meter via a terminal or to execute a host computer
program automatically.
Trademars
Visual Basic is a registered trademark of Microsoft Corporation in the
United States and/or other countries.
Symbols
Safety Symbol
The following symbols in this manual indicate the relative importance
of cautions and warnings.
Other symbols
Indicates advisory items related to performance or
correct operation of the instrument.
Indicates the reference.
*
Iterminology explained at the bottom of the word.
To Next Page
Loading...
