Chapter 2 Measurement Procedures
索引
4
3
2
1
7
6
5
10
9
8
Measurement
Procedures
Chapter 2
When the function selector is at the position other than
OFF or V and even with the effective battery range
indicator OFF, if you press the MEASURE key, the volt-
age will be output. Be careful of electric shock.
2.1 Preparing for Measurement
1.
Insert the batteries.
( p.38)
2.
Connect the test lead (connect the black test lead to the
EARTH terminal, and the red test lead to the LINE terminal)
3.
Adjust the needle to point to zero before measuring. With
the function selector at OFF, turn the meter movement
zero adjuster with a screwdriver until the needle points to
the center part of the in the scale.
To Next Page
Loading...
