Hioki FT6380 - 2.5 Convenient function; Data hold function

2.5 Convenient function
33
This function holds the measured value and continues to display
that value.
Press the HOLD key. The instrument will beep twice and the
[ ] mark will be displayed, and the measured value will be
held. The HOLD key will flash. To cancel hold mode, press the
HOLD key again. The instrument will beep once and the [ ]
mark will disappear, and the HOLD key will stop flashing.
This function makes the display easier to see in dark locations.
Press the BACKLIGHT key ( ). The backlight will turn on.
The backlight will turn off automatically when there has been no
operation for about 2 minutes.
To turn off the backlight, press the BACKLIGHT key ( ) again.
The backlight will turn off.
2.5 Convenient function
Data hold function (Holding the measured value)
Backlight function
(Making measurements in a dark location)
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com