2.5 Convenient function
You can sound an alarm (A high tone signifies a high alarm,
while a low tone signifies a low alarm.) using previously set
thresholds by pressing the key.
Thresholds and other settings must be configured in advance.
To cancel the alarm function, press the key again.
Alarm function
(Judging measured values and sounding an alarm)
1.
Configuring the alarm settings
Press the Fn key to switch to function mode. Using the ▼
and ▲ keys, select the resistance or current Alarm Settings
screen and press the OK key.
*For more information about function mode, see (p.50).
Alarm Settings screen for resistance measurement
Alarm Settings screen for current measurement
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
