2.5 Convenient function
Press the MEM key in either resistance measurement mode or
current measurement mode. The instrument will beep three
times and the displayed measured value will be stored along
with the memory number (1 to 2,000) in the instrument’s internal
memory.
* Measured values, filter use, and the [ ] and [ ]
marks are saved in memory.
Memory function (Saving measurement data)
Memory number
When the number of values saved in the instrument’s memory
reaches 2,000, the display will show “FULL,” and you will not
be able to save additional values. Delete unneeded values to
free up space.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com