2.5 Convenient function
3.
Set the threshold.
After configuring the Hi/Lo setting, set the threshold.
Using the ▼ and ▲ keys, set the threshold and press the
OK key.
You can move more quickly through threshold values by
pressing and holding the ▼ and ▲ keys.
Once the settings are complete, the screen will switch to
the Alarm Settings screen. To return to resistance mea-
surement or current measurement mode, press the Fn key
again or the A/Ω key.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
