53
Wireless Communications Function (IR4055 and IR4057-50 only)
Pairing the App
Home>Other
1
Instrument
Settings
2
3
The instrument is
automatically registered.
• When the app is launched for the rst
time (before being paired with any
instrument), the connection setup
screen will be displayed.
• While the mobile device is displaying
the connection setup screen, simply
move it close to the IR4055 or the
IR4057-50 to automatically pair it with
the instrument (the app can be paired
with up to 8 instruments).
4
Returns to the
Home
screen.
• Allow about 5 to 30 seconds for the
instrument to pair with the app after
being turned on. If the instrument
fails to pair within 1 minute, relaunch
GENNECT Cross and cycle the
instrument’s power.
• Instruments that have been registered
do not require to be registered again.
1
2
4
5
6
7
付録索引
3
To Next Page
Loading...
