4
Installation BRS20/30/40/50
Release
02
11/2018
2.4 Connecting the terminal blocks 42
2.4.1 Power supply 42
2.4.2 Signal contact (optional) 45
2.4.3 Digital input (optional) 46
2.5 Operating the device 47
2.6 Connecting data cables 48
2.7 Filling out the inscription label 48
2.8 Making basic settings 48
3 Monitoring the ambient air temperature 50
4 Maintenance and service 51
5Disassembly 52
5.1 Removing an SFP transceiver (optional) 52
5.2 Removing the device 53
6 Technical data 54
6.1 General data 54
6.2 Supply voltage 54
6.3 Power consumption/power output 56
6.4 Signal contact 56
6.5 Digital input 57
6.6 Climatic conditions during operation 58
6.7 Climatic conditions during storage 58
6.8 Dimension drawings 59
6.9 Stability 61
6.10 Electromagnetic compatibility (EMC) 61
6.11 Network range 63
6.11.1 10/100/1000 Mbit/s twisted pair port 63
6.11.2 Fast Ethernet SFP transceiver 63
6.11.3 Gigabit Ethernet SFP transceiver 65
6.11.4 2.5 Gigabit Ethernet SFP transceiver 67
6.11.5 Bidirectional Fast Ethernet SFP transceiver 67
6.11.6 Bidirectional Gigabit Ethernet SFP transceiver 68
6.12 Derating due to SFP transceiver 69
To Next Page
Loading...
Need help?
General
