Access to CLI
RM CLI EAGLE 20
Release
4.3
09/08
2.2
CLI via SSH (Secure Shell)
17
Note:
The OpenSSH Suite offers experienced network administrators a further op-
tion to access your device via SSH. To set up the connection, enter the fol-
lowing command:
ssh admin@149.218.112.53
admin represents the user name.
149.218.112.53 is the IP address of your device.
CLI appears on the screen with a window for entering the user name.
Up to five users can access the Command Line Interface at the same time.
Figure 3: Login window in CLI
a.b.c.d is the IP address of your device.
Enter a user name. The default setting for the user name is admin . Press
the Enter key.
Enter the password. The default setting for the password is private .
Press the Enter key.
You can change the user name and the password later in the Command
Line Interface.
Please note that these entries are case-sensitive.
The start screen appears.
Note: This device is a security-relevant product. For your own security,
change the password during the first startup procedure.
login as: admin
admin@a.b.c.d's password:
To Next Page
Loading...
