Hirschmann EAGLE 20 - Page 25

Using the CLI
RM CLI EAGLE 20
Release 4.3 09/08
3.1 Mode-based command hierarchy
25
Figure 8: Commands in the User Exec mode
Figure 9: Commands in the Privileged Exec mode
*(Hirschmann Eagle) >?
enable Turn on privileged commands.
help Display help for various special keys.
history Show a list of previously run commands.
logout Exit this session. Any unsaved changes are lost.
ping Send ICMP echo packets to a specified IP address.
show Display device options and settings.
*(Hirschmann Eagle) >enable
*(Hirschmann Eagle) #?
clear Clear several items.
configure Enter into global config mode.
copy Copy different kinds of items.
exit Exit from current mode.
help Display help for various special keys.
history Show a list of previously run commands.
login Set login parameters.
logout Exit this session. Any unsaved changes are lost.
network Modify network parameters.
ping Send ICMP echo packets to a specified IP address.
profile Activate or delete configuration profiles.
reboot Reset the device (cold start).
reload Reset the device (warm start).
save Save configuration.
set Set device parameters.
show Display device options and settings.