Appendix: Menu overview calibration menus
© 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 52
50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk
▼ Service menu (start screen)
back to the previous menu
to calibration menus
(access code input)
▼ Calibration menu (start access code input)
For access to the calibration menus
it is necessary to input a matching
5-digit code.
Use the rotary selection wheel to
input a numeral, and then push the
wheel button to select the next digit.
If input is complete the confirmation
screen appears:
▼ input service code (confirmation screen)
OK, confirm selected code
▼ zero-setting force 1
To Next Page
Loading...