Appendix: Menu overview calibration menus
© 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 53
50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk
to next calibration step
zero-setting force 1 (SKM)
abort calibration step
▼ zero-setting force 2
to next calibration step
zero-setting force 2 (SKM)
abort calibration step
▼ zero-setting slewing angle sensor
to next calibration step
zero-setting slewing angle (DWG)
abort calibration step
To Next Page
Loading...