Hirschmann MAR1040 - Mar1142

20
Installation MACH 1040
Release 04 10/2015
1.3.4 MAR1142-... with 16 Gigabit ports, ports on back and
PoE
Figure 4: Back of device:
1 - MAR1142 device
2 - LED display elements
3 - USB interface
4 - V.24 connection for external management
5 - Gigabit Ethernet combo ports with Power over Ethernet (PoE):
100/1000 Mbit/s fiber optic SFP slots. Alternative connections:
10/100/1000 Mbit/s twisted pair, RJ45 connections
6 - Gigabit Ethernet combo ports: 100/1000 Mbit/s fiber optic
SFP slots. Alternative connections: 10/100/1000 Mbit/s twisted pair, RJ45
connections
7 - P1: Connection for the voltage supply
8 - Relay 1: signal contact
9 - P2: Connection for the PoE voltage supply
10 - Relay 2: signal contact
Front of device:
11 - LED device status display elements
12 - LED port status display elements
13 - LED service port display element
14 - Service port
The device variants of the MACH 1040 with ports on the rear panel
have the following characteristics:
 The display LEDs are on the front of the device. There are 16 LEDs for
displaying the status of the Gigabit Ethernet ports and 6 LEDs for
displaying the device status.
 The supply voltage connection and the ports are on the back of the
device. The device has 16 Gigabit Ethernet ports and an additional Fast
Ethernet port on the front of the device that you can use for diagnosis
purposes.
Aufkleber MAC-Adresse
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
V.24USB
P
FAULT
Sb R1
R2
RM
MAR1140
P
FAULT
RM Stand by
R1 R2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ETHERNET Service Port
P1
R1
Relay
R2
Relay
P2
13 57 911 1315
2 4 6 8 10 12 14 16
P
11 12 13 14
7 9 10 8
2 3 41
65 6 6