Installation MACH 1040
Release
04
10/2015
37
2.4.2 Vertical mounting on the wall
Use the pre-mounted brackets included in the delivery.
Additionally attach 2 brackets to the back of the device.
You can obtain additional brackets as accessories (see on page 51
“Accessories”).
Fasten the device by screwing the brackets to the wall.
2.4.3 Grounding the device
The device is grounded via the separate grounding screw on the back of the
device.
WARNING
FIRE HAZARD
Install the device in a fire protected shell if you are mounting it vertically.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.
To Next Page
Loading...
