Installation MACH 1040
Release
04
10/2015
53
Underlying technical standards
The device has an approval based on a specific standard only if the
approval indicator appears on the device casing.
If your device has a shipping approval according to Germanischer Lloyd,
you find the approval mark printed on the device label. You will find out
whether your device has other shipping approvals on the Hirschmann
website under www.hirschmann.com in the product information.
Name
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards
– Immunity for industrial environments
EN 55022 Information technology equipment – Radio disturbance
characteristics – Limits and methods of measurement
EN 60950-1 Information technology equipment – Safety – Part 1: General
requirements
EN 61131-2 Programmable controllers – Part 2: Equipment requirements and
tests
EN 50121-4 Railway applications - EMC - emitted interference and interference
immunity for signal and telecommunication systems
FCC 47 CFR Part 15 Code of Federal Regulations
Germanischer Lloyd Rules for Classification and Construction VI-7-2 – GL
UL 508 Safety for Industrial Control Equipment
ISA 12.12.01 United States Standard for Safety for Nonincendive Electrical
Equipment for Use in Class I and II, Division 2 and Class III,
Divisions 1 and 2 Hazardous (Classified) Locations
EN 61850-3 Communications networks and systems in stations
IEEE 1613 Standard Environment and Testing Requirements for
Communication Networking Devices in Electric Power Substations
EN 50155 Railway applications - Electronic equipment used on rolling stock
Table 7: List of the technical standards
IEEE 802.1 D Switching, GARP, GMRP, Spanning Tree
Media access control (MAC) bridges (includes IEEE 802.1p Priority
and Dynamic Multicast Filtering, GARP, GMRP)
IEEE 802.1 Q Tagging
Virtual Bridged Local Area Networks (VLAN Tagging, GVRP)
IEEE 802.1 w Rapid Reconfiguration
IEEE 802.3 Ethernet
Table 8: List of IEEE standards
To Next Page
Loading...
