4
Installation MSP30/32/40/42 and MSM20/22/24/40/42/46/50
Release
12
06/2018
2.3 Installing and grounding the device 52
2.3.1 Installing the device onto the DIN rail 52
2.3.2 Mounting on a flat surface 53
2.3.3 Grounding the device 53
2.4 Connecting the terminal blocks 54
2.4.1 Supply voltage with the characteristic value C 54
2.4.2 Supply voltage with the characteristic value P 55
2.4.3 Signal contact 56
2.5 Connecting the ferrite 56
2.6 Installing terminal blocks, switching on the supply voltage 57
2.7 Installing media modules 57
2.7.1 Device variants featuring customer-specific version
with the characteristic value HH 58
2.7.2 Device variants featuring customer-specific version
with the characteristic value HX 59
2.7.3 Connecting the external PoE supply voltage of media
module MSM46 59
2.8 Connecting an I/O module 60
2.8.1 Connecting actuators and sensors 60
2.9 Installing an SFP transceiver (optional) 61
2.10 Connecting data cables 62
2.10.1 10/100/1000 Mbit/s twisted pair port 63
2.10.2 10/100 Mbit/s twisted pair port 63
2.10.3 1/2.5 Gbit/s F/O port 63
2.10.4 100/1000 Mbit/s F/O port 63
2.10.5 100 Mbit/s F/O port 63
3 Basic Settings 64
4 Monitoring the ambient air temperature 65
5 Upgrading Software 66
6 Maintenance and service 67
7Disassembly 68
7.1 Removing an SFP transceiver (optional) 68
7.2 Removing a media module 68
7.2.1 Device variants featuring customer-specific version
with the characteristic value HH 69
7.2.2 Device variants featuring customer-specific version
with the characteristic value HX 70
To Next Page
Loading...
Need help?
General
