48
Installation RSPE 30/32/35/37
Release
12
10/2015
4 Upgrading Software
The upgrade options for your RSPE 30/32/35/37 device depend on the
software level of the device.
See “Device name and product code” on page 17.
Note: For software version 04.0 or higher, “HiOS” is available as a common
software image for all software levels.
You select only the desired redundancy function during the installation of the
image. After finishing the installation and manually restarting the device, the
device automatically activates the functions of the software level saved in the
product code.
Software
version
Software level according to the
product code
2S 2A 3S
HiOS 03.1 Name of the software image – HiOS-2A –
Range of functions corresponds to – 2A –
From HiOS 04.0
onward
Name of the software image HiOS HiOS HiOS
Range of functions corresponds to 2S 2A 3S
Table 13: Upgrade options
To Next Page
Loading...
Need help?
General
