Hirschmann RSPE 30

52
Installation RSPE 30/32/35/37
Release 12 10/2015
7.2 Removing an SFP transceiver (optional)
Proceed as follows:
 Pull the SFP transceiver out of the slot by means of the opened lock.
 Close the SFP transceiver with the protective cap.
7.3 Removing a media module (optional)
You have the option to remove the media modules while the device is
operating.
Proceed as follows:
 Loosen the 2 screws on the media module.
 Pull the media module out of the slot.
 Close the media module slot on the device with a dummy panel.
See “Accessories” on page 63.
1
2