Hisense AX3100Q - Connections; Use the HDMI Earc;Arc Socket

To Next Page

To Previous Page

670 mm / 26.4”

5. Placement and Mounting

5.1 Placement

A If your TV is placed on a table, you can place

the soundbar on the table directly in front of

the TV stand, centered with the TV screen.

B If your TV is attached to a wall, you can

mount the soundbar on the wall directly

below the TV screen.

5.2 Wall Mounting (if using option-B)

- Installation must be carried out by qualied

personnel only. Incorrect assembly can

result in severe personal injury and property

damage (if you intend to install this product

yourself, you must check for installations

such as electrical wiring and plumbing

that may be buried inside the wall). It is the

installer’s responsibility to verify that the

wall will safely support the total load of the

soundbar and wall brackets.

- Additional tools (not included) are required

for the installation.

- Do not overtighten screws.

- Keep this instruction manual for future

reference.

- Use an electronic stud finder to check the

wall type before drilling and mounting.

WARNING

• To prevent injury, this apparatus must be securely

attached to the oor/wall in accordance with the

installation instructions.

• Suggested wall mounting height: ≤ 1.5 meters.

1. Drill 2 parallel holes (Ø 5.5-6 mm each

according to wall type) in the wall. The

distance between the holes should be 670

mm.

2. Insert the supplied wall anchors into 2 screw

holes on the wall. Insert the supplied wall

bracket screws through the wall brackets into

the wall anchors. Fix and tighten the screws

on the wall.

3. Hang the unit on the wall mount brackets.

3.5x50mm

6. Connections

6.1 Use the HDMI eARC/ARC Socket

The eARC/ARC (Enhance Audio Return Channel)

function allows you to send audio from your ARC-

compliant TV to your soundbar through a single

HDMI connection. To enjoy the ARC function,

please ensure your TV is both HDMI-CEC and ARC

compliant and set up accordingly. When correctly

set up, you can use your TV remote control to

adjust the volume output (VOL

－

and MUTE)

of the soundbar.

• Connect the HDMI cable from soundbar

HDMI (TV eARC/ARC

)

socket to the HDMI

eARC/ARC socket on your ARC compliant TV.

Then press the remote control to select HDMI

eARC/ARC.

56:/)'2

.*3/

:<K'8)'8)

56:/)'2

.*3/

:<K'8)'8)

.KGJVNUTK

Tips:

• Your TV must support the HDMI-CEC and

ARC function. HDMI-CEC and ARC must be

set to On.

• The setting method of HDMI-CEC and ARC

may differ depending on the TV. For details

about ARC function, please refer to the

owner’s manual.

• Only HDMI 1.4 or higher version cable can

support the ARC function.

Use with Roku TV

• If you have a Roku TV™, simply plug in the

HDMI cable to the eARC/ARC ports and follow

the Roku TV Ready™ on-screen instructions.

Use the Hisense EzPlay Function

For Hisense EzPlay, when the Soundbar connects

with a Hisense TV via HDMI eARC/ARC, there will be

a Soundbar Setting menu on the TV, and you can

control this menu via your TV remote to control

most of the Soundbar features.

TV menu example (different models may have

dierent menus) :

Setting--sound--Soundbar Setting.

Note:

• This function is available only when both

Soundbar and TV support Hisense Ezplay.

• This function requires Soundbar and TV

connected via HDMI eARC/ARC, and the CEC

of the TV must be trned ON.

• If everytime setting right, for the first time

connect, there would be a tip on the TV

screen to guide you find the Soundbar

setting menu.

eARC/ARC