control display, but the oven will not operate. Food may
be safely removed from the oven while it is still in the
Sabbath mode, however the oven cannot be turned
back on until after the Sabbath/ Holidays. After the
Sabbath observance, turn off the Sabbath mode. Touch
and hold down Cancel for 3 seconds simultaneously to
turn the Sabbath mode off. The oven may then be used
with all normal functions.
Sabbath mode to allow the oven to reach the set
temperature.
(15) Temp Adjust
The temperature in the oven has been calibrated at the
factory. When first using the oven, be sure to follow
recipe times and temperatures. If you think the oven is
too hot or too cool, you can correct the temperature in
the oven. Before correcting, test a recipe by using a
temperature setting that is higher or lower than the
recommended temperature. The baking results should
help you to decide how much of an adjustment is
needed.
The oven temperature can be adjusted ±25 ℉ (±14°C).
How to correct the oven temperature
1 Touch SETTING in standby continuously until
SET CALI display in panel,touch START to save. Default
cook function is BAKE, you can set other function.
2 Enter the adjustment you want to make using
the number pad. (0- 25). If need minus -, touch SETTING
again.
3 Touch START to save the changes.
NOTE
This adjustment will not affect the self-cleaning
temperatures. The adjustment will be retained in
memory after a power failure.
(16) Temp Unit (Fahrenheit or Celsius temperature
selection)
You can program the oven control to display the
temperature in Fahrenheit or Celsius. The oven has been
preset at the factory to display in Fahrenheit.
How to change the display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1
Touch SETTING in standby continuously until
SET ℉/℃ display in panel,touch START to save.
2 Touch SETTING to change between (Fahrenheit)
and(Celsius).
3 Touch START to save the changes.
(17) Time of Day
The oven control can be programmed to display time of
day in the 12 hour or 24 hour mode. The oven has been
preset at the factory to display in the 12 hour mode.
How to change between the 12 and 24 hour time of day
display
1 Touch SETTING in standby continuously until
SET 24 H display in panel,touch START to save.
2 Touch SETTING to change between (12Hr)
and(24 Hr).
3
Touch START to save the changes.
(18) Sound 0n/Off
Using Sound On/OFF, you can set the oven controls to
operate silently.
How to turn the sound on or off
1 Touch SETTING in standby continuously until
SET BEEP display in panel,touch START to save.
2 Touch SETTING to change between (ON BEEP)
and(OFF BEEP) .
3
Touch START to save the changes.
(19) Demo mode
This option is for use by retail establishments for display
purposes only.
(When Demo mode is on, the heating element is
disabled and does not operate.)
How to enable or disable the demo mode
1 Touch SETTING in standby continuously until
SET DISP display in panel,touch START to save.
2 Touch SETTING to change between (ON DISP)
and(OFF DISP).
3
Touch START to save the changes.
(20) Control lockout
This feature lets you lock the buttons on the touch pad
so they cannot be activated accidentally.After the lock,
only "Cancel" and "SETTING" can operate.
How to activate the control lockout feature
1
Press SETTING/LOC(Hold 3 sec) for 3 seconds.
LoC and the lock icon appear in the display as well
as the current time.
2 After activating the lockout in the non-cleaning
function, the oven will lock the door and the screen will
display the lock icon. Only Cancel and SETTING/LOC(Hold
To Next Page
Loading...
