Hisense HER30F5CSS - Top Hood and Cabinet Specifications

7
The maximum depth of cabinets installed above
cooking tops be 13 in (330mm)
(1) Top Hood and cabinet specifications
Condition
Minimum clearance
allowed
Clearance between the top of the cooking surface and the bottom of an unprotected
wood or metal cabinet
30”
cabinet that is protected by not less than:
 1/4-inch-thick flame-retardant mill board covered with not less than:
 No. 28 MSG sheet steel or
 0.015-inch-thick stainless steelor
 0.024-inch-thick aluminum or
 0.020-inch-thick copper
24”