Before you start
• Once your new Hisense dishwasher has been delivered to you, carefully unpack the dishwasher
and check for any damage.
• If the dishwasher has been damaged, do not install the dishwasher, and contact Hisense Customer
Service listed on the warranty card.
• If there is no damage to the product, you can proceed with the installation. Before installation,
make sure to read through the installation guide and follow the directions inside.
NOTE!
Keep packaging out of the reach of children and pets to ensure safety.
1. Placing the dishwasher
The dishwasher is intended for installation under a countertop. The recess dimensions are illustrated.
Make sure the area on which the dishwasher is to be installed is firm.
Inches (mm)
The electrical and
water supplies should
enter through the
area indicated by the
shading on the
illustration.
If the dishwasher is built-in, the surrounding furnishings must be resistant to any condensation from
the dishwasher.
NOTE!
Framed cabinets require additional finished filler material behind the face frame for a proper
installation. A minimum 3½” (89 mm) finished return is required on all sides of the opening.
Frameless
cabinetry
Filler
Framed
cabinetry
2. Fit the protective film
Mount the protective film beneath the countertop and up around the edge. The function of the protective
film is to protect the countertop from moisture. (The protective film is in the enclosed plastic bag.)
31
To Next Page
Loading...
