Before washing for the first time
Water hardness
In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness
Contact the local water utility to check the water hardness in your area. This is important to determine
how much detergent and rinse aid to use.
In general, more rinse aid and detergent are needed for hard water.
Basic settings
The first time the dishwasher is switched on, it is important that you choose the right settings to ensure
good dishwashing results. See page 19.
Set up:
• Rinse aid
• TAB (All-in-one detergent)
Fill up with rinse aid
Use rinse aid to improve wash and dry times. Also use rinse aid to achieve clear and spotless results.
Fill up the rinse aid compartment with rinse aid if you have selected Rinse aid 3:01 - 3:05. See page
19.
Lift up to open
Press to close
1. Open the rinse aid compartment lid.
2. Carefully fill up with rinse aid to the level marked MAX.
3. Wipe up any spilled rinse aid around the compartment.
4. Close the lid firmly.
7
To Next Page
Loading...
Need help?
General
