Problem Possible causes Action
Select a program with a high
temperature to dissolve grease
on very dirty dishes, such as In-
tensive 70°. Or run a self-clean-
ing program. See Self-clean in
the chapter Using the dishwash-
Grease deposits in the dish- Low temperature programs
washer. have been selected for a pro-
longed period.
er.
The dishes are not dry enough. The Auto Dry setting has not Activate the Auto Dry setting.
been activated. See the chapter Settings.
The dishwasher is not fully Fully load the dishwasher.
loaded.
Rinse aid needs topping up or Top up with rinse aid or in-
dosage is set too low. crease the rinse aid dosage
setting.
Switch all-in-one detergents or
deactivate the TAB setting and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.
The setting TAB is activated and
all-in-one detergent with insuffi-
cient drying effect is being used.
28
To Next Page
Loading...
