Hisense HV643D90 User Manual

Basic settings
The first time the dishwasher is switched on, it is important that you choose the right settings to ensure
good dishwashing results. See the chapter Settings.
Set up:
• Rinse aid
• Water hardness
• TAB
Top up with rinse aid
Drying is faster and a better result is achieved if you use rinse aid. You will also achieve a better
dishwashing result with clear and spotless dishes.
Top up the rinse aid compartment with rinse aid if you have selected Rinse aid 01 - 05.
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked MAX .
3. Wipe up any splashes of rinse aid around the compartment.
4. Close the lid firmly.
Top up with salt
Add salt to the salt compartment if you have selected Water hardness 01 - 07.
1. Remove the salt compartment lid by turning it anticlockwise.
2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. First, pour in
about 1 L of water.
8
3. Add enough salt to fill the salt compartment (max. 750 gram). Use special dishwasher salt.
4. Wipe up any excess salt so that the lid can be screwed on firmly.
WARNING!
In order to avoid rust stains a dishwashing program must be started immediately after adding
salt.
Press the elliptical protrusion
above the lid while pulling
upwards to open the lid

Hisense HV643D90 Specifications

General

Door color	Black
Water fill	Cold, Hot
Cord length	1.5 m
Control type	Touch
Display type	LED
Product size	Full size (60 cm)
Tub material	Stainless steel
Number of baskets	3 basket(s)
Custom panel-ready	Yes
Appliance placement	Fully built-in
Cutlery compartment type	Drawer
Baskets adjustable placement	Upper
Half-load	No
Cycle time	221 min
Noise level	45 dB
Drying system	Residual heat
Delay start (max)	24 h
Dishwashing programs	60min, Auto, Eco, Glass/delicate, Hygiene, Intensive
Number of spray zones	4
Number of place settings	16 place settings
Number of washing programs	6
Number of temperature settings	5
Cycle time (quick washing program)	15 min
Country of origin	China
Current	10 A
Connected load	1900 W
Power plug type	Type G
AC input voltage	220-240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (left-on)	0.49 W
Water consumption per cycle	11 L
Energy consumption per cycle	0.87 kWh
Package depth	682 mm
Package width	656 mm
Package height	889 mm
Package weight	37000 g

Weight and Dimensions

Depth	555 mm
Width	598 mm
Height	816 mm
Weight	32000 g
Installation compartment height (max)	885 mm