Hisense HV643D90 User Manual

that you select the right setting for the water softener! See Water hardness in the chapter Settings.
7
WARNING!
Hard water leaves a white coating on dishes and inside the dishwasher. It is therefore important
Before washing for the first time
Increased consumption during regeneration
The dishwasher's built-in water softener is regularly regenerated to maintain its function. Regeneration
extends the dishwashing program and increases energy and water consumption. Just how often the
dishwasher's water softener is regenerated depends on the selected setting.
Example: If the Eco 55° program is run with the default water hardness setting ( 04 ), the water
softener is regenerated at regular intervals, energy consumption increases by 0.025 kWh, and water
consumption increases by 2.5 litres, while the program time is extended by 1 minute. Regeneration
takes place during the program’s main wash.
Water hardness is specified using German degrees of water hardness (°dH), French degrees of water
hardness (°fH), English degrees of water hardness (°eH) or millimoles per litre (mmol/l).
In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness
Water hardness
A water supply with a water hardness in excess of 2.8°dH (5°fH / 3.5°eH / 0.5 mmol/L) must be
Contact the local waterworks to check the water hardness in your area.
Make a note of the water hardness:____________
Recommended settingmmol/L°eH°fH°dH
000.0-0.50-3.50-50-2.8
010.6-1.03.6-7.06-102.9-5.6
021.1-2.07.1-14.011-205.7-11.2
032.1-3.014.1-21.021-3011.3-16.8
04
05
3.1-4.0
21.1-28.0
31-40
16.9-22.4
06
07
4.1-5.0
28.1-35.0
41-50
22.5-28.0
5.1-6.5
35.1-45.5
51-65
28.1-36.4
6.5+
45.5+65+36.4+
If the water hardness exceeds 36.4°dH (65°fH / 45.5°eH / 6.5 mmol/L), we recommend connecting
an external water softener.
This is done automatically with the aid of the built-in water softener. In order for the water
softened.
function properly, its settings must be adjusted to the hardness of the water supply. Once
softener to
adjusted the water softener settings, add detergent and rinse aid in doses suitable for soft
you have
water.
Never run the dishwasher with an empty salt compartment if the water supply has a water
hardness in excess of 2.8°dH (5°fH / 3.5°eH / 0.5 mmol/L).

Hisense HV643D90 Specifications

General

Door color	Black
Water fill	Cold, Hot
Cord length	1.5 m
Control type	Touch
Display type	LED
Product size	Full size (60 cm)
Tub material	Stainless steel
Number of baskets	3 basket(s)
Custom panel-ready	Yes
Appliance placement	Fully built-in
Cutlery compartment type	Drawer
Baskets adjustable placement	Upper
Half-load	No
Cycle time	221 min
Noise level	45 dB
Drying system	Residual heat
Delay start (max)	24 h
Dishwashing programs	60min, Auto, Eco, Glass/delicate, Hygiene, Intensive
Number of spray zones	4
Number of place settings	16 place settings
Number of washing programs	6
Number of temperature settings	5
Cycle time (quick washing program)	15 min
Country of origin	China
Current	10 A
Connected load	1900 W
Power plug type	Type G
AC input voltage	220-240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (left-on)	0.49 W
Water consumption per cycle	11 L
Energy consumption per cycle	0.87 kWh
Package depth	682 mm
Package width	656 mm
Package height	889 mm
Package weight	37000 g

Weight and Dimensions

Depth	555 mm
Width	598 mm
Height	816 mm
Weight	32000 g
Installation compartment height (max)	885 mm