Hitachi 53SDX20BB - Page 16

16
ADJUST MODE
SERVICE SUB BRT* WHITE BAL* G DRV (COOL)* 3F R DRV (COOL)* 3F R CUTOFF (COOL)* 80 G CUTOFF (COOL)* 80 B CUTOFF (COOL) 80 H POSI (V/P)* 3F 47 VD-POS (FC)* 3F FACT RESET
CH U/D, INPUT
CH U/D, INPUT
CH U/D, INPUT CH U/D, INPUT
CH U/D, INPUT
SELECT
SELECT
CH U/D, INPUT
WARM, NTSC, STD ADJ MODE
1. Press   to select the G DRV or R DRV. 2. Press select to change the COOLWARM
NTSCCOOL mode. Adjust on each mode, but cannot adjust on the COOL mode.
3. WARM and NTSC mode data is offset data
based on the COOL mode data.
4. Do not adjust WHITE BALANCE in WARM or
NTSC mode. Adjust in COOL mode only.
CH U/D, INPUT
SELECT
MENU

SELECT
ADJUST MODE
SERVICE SUB BRT* WHITE BAL* G DRV (COOL)* 48 R DRV (COOL)* 4F R CUTOFF (COOL)* 80 G CUTOFF (COOL)* 80 B CUTOFF (COOL) 80 H POSI (V/P)* 3F 47 VD-POS (FC)* 3F FACT RESET
ADJUST MODE
SERVICE SUB BRT* WHITE BAL* G DRV (COOL)* 4E R DRV (COOL)* 58 R CUTOFF (COOL)* 80 G CUTOFF (COOL)* 80 B CUTOFF (COOL) 80 H POSI (V/P)* 3F 47 VD-POS (FC)* 3F FACT RESET
ADJUST MODE
SERVICE SUB BRT* WHITE BAL* G DRV (COOL)* 3F R DRV (COOL)* 3F R CUTOFF (COOL)* 80 G CUTOFF (COOL)* 80 B CUTOFF (COOL) 80 H POSI H* 3F 47 VD-POS (FC)H* 3F FACT RESET
ADJUST MODE
SERVICE SUB BRT* WHITE BAL* G DRV (COOL)* 3F R DRV (COOL)* 3F R CUTOFF (COOL)* 80 G CUTOFF (COOL)* 80 B CUTOFF (COOL) 80 H POSI* 3F 47 VD-POS (FC)* 3F FACT RESET
ADJUST MODE
SERVICE SUB BRT* WHITE BAL* G DRV (COOL)* 3F R DRV (COOL)* 3F R CUTOFF (COOL)* 80 G CUTOFF (COOL)* 80 B CUTOFF (COOL) 80 H POSI H* 3F 47 VD-POS (FC)H* 3F FACT RESET
ADJUST MODE
SERVICE SUB BRT* WHITE BAL* G DRV (COOL)* 3F R DRV (COOL)* 3F R CUTOFF (COOL)* 80 G CUTOFF (COOL)* 80 B CUTOFF (COOL) 80 H POSI* 3F 47 VD-POS (FC)* 3F FACT RESET
Other Mode 1080i through mode
Other Mode 1080i through mode
SELECT
Only adjust in cool mode.
VD Position Adj Mode
Press   to adjust
H Position Adj Mode
Press   to adjust
1.2 I
2
C Parameter List Cont.