Hitachi AXM950E - Bluetooth Operation; USB Operation

GB
34
Bluetooth® Operation
The unit has a Bluetooth function that can receive a signal within 8 metres.
Pairing the unit with a Bluetooth device to listen to music:
1. While in the ON mode, turn the FUNCTION dial on the unit or press the DOCK/BT
button on the remote control to select BT mode.
2. Press and hold the /PAIR button until the display ash “PAIRING”.
3. Activate your Bluetooth device and select the search mode.
4. “BLUEPORT” will appear on your Bluetooth device.
5. Select “BLUEPORT”” and enter “0000” for the password if necessary.
6. To disconnect the Bluetooth function, switch to another function on the unit or disable
the function from your Bluetooth device.
If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter
pairing mode automatically.
USB Operation
1. While in the ON mode, turn the FUNCTION dial on the unit or press the USB button on
the remote control to select USB mode.
2. Connect a USB device to USB port directly or with a USB cable (not included).
3. The unit will automatically starts playback.
4. Press the button to start /pause / resume playback.
5. Press the buttons to skip backwards or skip forwards.
6. Press the buttons on the remote control to select the desired folder (if the USB
memory device has more than one folder).
7. Press the button to stop playback.
• The unit can only play MP3 and WMA le formats in USB operation.
• This unit supports USB versions 1.1 and 2.0.
• The unit can support USB devices with up to 32GB of memory.
• The unit cannot play WMA les protected by “DRM FILE”.
• The unit may not be compatible with all USB devices, this is not an
indication of a problem with the unit.
AXM950E_IB_01GB_RC_130510_Michelle.indd 34 10/5/13 3:13 PM