Hitachi Compute Blade 500 Series - Page 53

8. Enter the username and password that created in User ID creation for
management module on page 2-24 in the Authorization settings
dialog
box. And then click OK.
Default user ID deletion
Delete the default user ID <operator> after login with the username and
password that created in User ID creation on page 2-22.
1. Start a terminal emulator to the switch module from the system console.
2. Input <newuser>, and then press Enter.
3. Input <new password>, and then press Enter.
Initial setup
2-29
Hitachi Compute Blade 500 Series Getting Started Guide