Hitachi Compute Rack 220H - Page 56

4-4 Replacing parts
Hitachi Compute Rack 220H CRU Replacement Guide
3. Hold the lever and push the HDD/SSD into the extension storage bay slowly.
When the HDD/SSD stops at the bottom, slowly close the lever to lock the
HDD tray.
NOTICE
Install the replacing HDD/SSD in the same ex
tension storage bay
where the failed HDD/SSD has been removed. Otherwise, data may
be lost.
Figure 4-3: Installing an HDD/SSD
4. After a while, confirm that the HDD status LED on the HDD tray of the
replacing HDD/SSD turns off or lights solid green.
During rebuilding data in progress, the HDD status LED blinks
amber.
Do not turn off the system power during the data rebuild.
2
3